Combo Buggy Mugen MBX8R Nitro Competition KIT 3
€1,049.90
€1,149.90
Inicio
- RC Cars
- RC Planes
- Helicopters and Drones RC
- RC Boats
- Spare parts for RC cars
- Brushless Accessories
- Oil and Lube
- Batteries and Chargers
- Nitro Fuel
- RC Bodies
- Carbon Fiber Parts
- Transmitters and Receivers
- RC Tools
- Bag and Carriage RC trolley
- RC Nitro Engines
- Outlet - RCMITICO
- Customized Clothing
- RC Tires
- Servos
- Electric Scooter and Motorbike
- Screws
Trending
Special Products
Our Stores
Filter By
Categories
Categories
Availability
Availability
Brand
Brand
RC Tools
There are 546 products.
€21.90
€21.95
€21.90
€14.25
€16.45
€15.35
€8.00
€44.90
Skyrc Engine Heater
Out-of-Stock
Fits all .19-.26 RC nitro engines 12V DC source with low voltage cutoff
€30.90
Shock absorbers holder Aluminum Blue SkyRC
In Stock
Aluminium shock absorber bracket - BLUE
Technical data:
Weight: approx. 240g
Aluminium blue
Diameter complete stand: approx. 50mm
Diameter holes for shock absorber: 4x approx. 13mm / 1x approx. 10.4mm
Technical data:
Weight: approx. 240g
Aluminium blue
Diameter complete stand: approx. 50mm
Diameter holes for shock absorber: 4x approx. 13mm / 1x approx. 10.4mm
€29.90
SkyRC Chassis Droop Gauge -3 to 10mm Black
In Stock
In order to optimally measure the suspension travel of a car, a so-called suspension travel meter is required. With it, both negative and positive suspension travel can be determined and measured.
The suspension travel is one of the most important parameters of the set-up, as it influences, for example, the roll angle and weight distribution during acceleration, braking and cornering.
Technical data:- Measuring range: -3 to +10mm- Graduation: 1mm
The suspension travel is one of the most important parameters of the set-up, as it influences, for example, the roll angle and weight distribution during acceleration, braking and cornering.
Technical data:- Measuring range: -3 to +10mm- Graduation: 1mm
€13.90
SkyRC Chassis Ride Height gauge 3.8 -7mm Black
In Stock
Use this gauge to determine the vehicle height or, more precisely, the distance between the bottom of the chassis and the ground.
Just like the suspension travel, the vehicle height also influences the rolling behaviour (tendency to roll over) of the vehicle and the available grip as well as the cornering speed.
Technical data:- Measuring range: 3.8 - 7mm- Graduation: 0.2mm
Just like the suspension travel, the vehicle height also influences the rolling behaviour (tendency to roll over) of the vehicle and the available grip as well as the cornering speed.
Technical data:- Measuring range: 3.8 - 7mm- Graduation: 0.2mm
€12.90
Aluminum Car stand SkyRC On Road 1/8 - Buggy 1/10
In Stock
Made in Aluminum.
Car stand for a perfect maintenance. Fits 1/8 On Road, 1/10 On Road, 1/10 Buggy.
Car stand for a perfect maintenance. Fits 1/8 On Road, 1/10 On Road, 1/10 Buggy.
€34.90
SkyRC setup system for 1/10 On Road - Blue
In Stock
Set-up system made of blue anodised aluminium.
Setup table for RC On Road 1/10 Scale cars.
Setup table for RC On Road 1/10 Scale cars.
€114.90
SkyRC Led Pit Light Black
Out-of-Stock
The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels.
Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.
Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.
€64.90
€3.50
€38.99
€5.90
Anti slip rubber pad SMJ x10 pcs
In Stock
Attaching this non-slip rubber pad to the under side of a setting board makes it more stable on your pit table and easier to work on your car. Can also help reduce vibration from cooling fans by attaching to the under side of a power supply or charger.
Quantity: 10 pcs
Quantity: 10 pcs
€5.90
SMJ Car stand 20mm for 1/8 and 1/10 On Road
In Stock
The height has been increased to 20mm in overall thickness to allow for more versatile use. Recommended as a car stand for 1/10 GP pit work and engine adjustment.
Size: 300 x 90 x 20 mm.
Size: 300 x 90 x 20 mm.
€13.90
SMJ LCG Balance weight 5gr x2 pcs
In Stock
This round shaped balance weight is highly versatile and can be used in any car. The surface mounting area has been reduced as much as possible to minimise any changes in chassis flex characteristics. Two mounting screw holes allow for fine tuning of weight balance and provide greater flexibility in mounting location. Available in 5, 72.25mm and 10 gram weights.
Quantity: 2 pcs
Quantity: 2 pcs
€10.90
SMJ LCG Balance weight 7.5gr x2 pcs
In Stock
This round shaped balance weight is highly versatile and can be used in any car. The surface mounting area has been reduced as much as possible to minimise any changes in chassis flex characteristics. Two mounting screw holes allow for fine tuning of weight balance and provide greater flexibility in mounting location. Available in 5, 72.25mm and 10 gram weights.
Quantity: 2 pcs
Quantity: 2 pcs
€12.90
SMJ LCG Balance weight 10gr x2 pcs
In Stock
This round shaped balance weight is highly versatile and can be used in any car. The surface mounting area has been reduced as much as possible to minimise any changes in chassis flex characteristics. Two mounting screw holes allow for fine tuning of weight balance and provide greater flexibility in mounting location. Available in 5, 72.25mm and 10 gram weights.
Quantity: 2 pcs
Quantity: 2 pcs
€13.90
Tugsten plate weight plate 34g 53x33x1mm
In Stock
Adjust the left and right weight balance by sticking it under the receiver and ESC. It is especially suited for stock class with large capacity batteries and small / lightweight ESCs.
At a thickness of just 1 mm, it helps to minimize the disadvantage of raising the center of gravity. Designed to fit perfectly on the INFINITY IF14-2, but can also be used on other vehicles. Size: 53x33x1.0mm Weight: 34g (please note manufacturing tolerance of ± 1g)
At a thickness of just 1 mm, it helps to minimize the disadvantage of raising the center of gravity. Designed to fit perfectly on the INFINITY IF14-2, but can also be used on other vehicles. Size: 53x33x1.0mm Weight: 34g (please note manufacturing tolerance of ± 1g)
€35.90
Tugsten plate weight plate 11g 33x16.7x1mm
In Stock
Adjust the left and right weight balance by sticking it under the receiver and ESC. It is especially suited for stock class with large capacity batteries and small / lightweight ESCs.
At a thickness of just 1 mm, it helps to minimize the disadvantage of raising the center of gravity. Designed to fit perfectly on the INFINITY IF14-2, but can also be used on other vehicles. Size: 33x16.7x1.0 Weight: 11g (please note manufacturing tolerance of ± 1g)
At a thickness of just 1 mm, it helps to minimize the disadvantage of raising the center of gravity. Designed to fit perfectly on the INFINITY IF14-2, but can also be used on other vehicles. Size: 33x16.7x1.0 Weight: 11g (please note manufacturing tolerance of ± 1g)
€23.90
€48.50
€42.90
€5.90
Hard Thread Lock Ultimate Racing Hard 10 ML
In Stock
This is the High strength Thread Locking Compound from ULTIMATE RACING. Anaerobic nature allows it to cure only when confined between metal parts. Low strength designed for easy disassembly. Must be used on metal or steel items, not recomended on plastic. Prepared to work under temperatures between -60ºC. and +150ºC.
€4.95
Thread lock Hard Green 50ml Ultimate Racing
In Stock
This is the 50ml High strength Thread Locking Compound from ULTIMATE RACING.
Anaerobic nature allows it to cure only when confined between metal parts. The hard thread lock is intended for all those parts that do not want to be disassembled. It is preferably for use on aluminum or steel parts, it is not recommended for plastic parts. Its working temperature is between -60ºC and 150ºC
Anaerobic nature allows it to cure only when confined between metal parts. The hard thread lock is intended for all those parts that do not want to be disassembled. It is preferably for use on aluminum or steel parts, it is not recommended for plastic parts. Its working temperature is between -60ºC and 150ºC
€19.95
Ultimate Racing Soft Thread Lock Medium 10 ML
Out-of-Stock
This is the Soft strength Thread Locking Compound from ULTIMATE RACING. Anaerobic nature allows it to cure only when confined between metal parts. Low strength designed for easy disassembly. Must be used on metal or steel items, not recomended on plastic. Prepared to work under temperatures between -60ºC. and +150ºC.
€4.95
Thread lock Hard Green 50ml Ultimate Racing
In Stock
This is the 50ml Medium strength Thread Locking Compound from ULTIMATE RACING for permanent threaded assemblies.Anaerobic nature allows it to cure only when confined between metal parts. Resists fuels, lubricants and most industrial liquids and gases. Must be used on metal or steel items, not recomended on plastic. Prepared to work under temperatures between -60ºC. and +150ºC.
€19.95
Ultimate Dirt-Off Cleaner 500ml
In Stock
Recommendations for use:Apply Dirt-Off to the car and let it work. Next, using a brush, we proceed to clean those parts where there was more adhered dirt. Finally, we spray the car with Dirt-Off again and proceed to blow the car to remove the dirt while getting rid of excess Dirt-Off.
€12.95
Dual Lock Fastener Tape 15cm x2 pcs
Out-of-Stock
The Ultimate Racing Body Mount Dual Lock Tape, and is intended for use with all RC cars.
It's not really velcro, though -- instead of hooks and loops, both surfaces have these tiny hard plastic mushroom-shaped things that grab each other by the hundreds and don't let go. Both sides are the same, so there is only one tape (called self-mating). This package includes 2 pcs of 15 cm.
It's not really velcro, though -- instead of hooks and loops, both surfaces have these tiny hard plastic mushroom-shaped things that grab each other by the hundreds and don't let go. Both sides are the same, so there is only one tape (called self-mating). This package includes 2 pcs of 15 cm.
€5.45
€5.95
Plastic screw Box
Out-of-Stock
This is the Ultimate Racing Screw and Nut Assortment Box, a divided plastic case to keep all hardware well organized.
€6.80