This is the 50ml High strength Thread Locking Compound from ULTIMATE RACING.
Anaerobic nature allows it to cure only when confined between metal parts. The hard thread lock is intended for all those parts that do not want to be disassembled. It is preferably for use on aluminum or steel parts, it is not recommended for plastic parts. Its working temperature is between -60ºC and 150ºC
This is the 50ml Medium strength Thread Locking Compound from ULTIMATE RACING for permanent threaded assemblies.Anaerobic nature allows it to cure only when confined between metal parts. Resists fuels, lubricants and most industrial liquids and gases. Must be used on metal or steel items, not recomended on plastic. Prepared to work under temperatures between -60ºC. and +150ºC.
Includes 50 pcs / each size:- 3x8mm Flat Head Screws- 3x10mm Flat Head Screws- 3x12mm Flat Head Screws- 3x8mm Button Head Screws- 3x12mm Button Head Screws- 3x12mm Cap Head Screws- 3x25mm Cap Head Screws- 3x4mm Cup Point Set Screws- 3x5mm Cup Point Set Screws- 3mm Nut (20pcs)
Quality Reusable plastic pit case FREE
General Screw Installation & Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material.
Included: - 4x6mm Flat Head Screws (20pcs)- 4x10mm Flat Head Screws (20pcs)- 4x12mm Flat Head Screws (20pcs)- 4x16mm Flat Head Screws (20pcs)- 4x8mm Button Head Screws (20pcs)- 4x12mm Button Head Screws (20pcs)- 4x10mm Cap Head Screws (50pcs)- 4x4mm Cup Point Set Screws (50pcs)- 4x5mm Cup Point Set Screws (50pcs)- 4mm Nut (20pcs)
Quality Reusable plastic pit case FREE
Notes: Use either a wax or grease on the threads to help prevent stripping while going into new or hard material.