Combo Buggy Mugen MBX8R Nitro Competition KIT 3
€1,049.90
€1,149.90
Inicio
- RC Cars
- RC Planes
- Helicopters and Drones RC
- RC Boats
- Spare parts for RC cars
- Brushless Accessories
- Oil and Lube
- Batteries and Chargers
- Nitro Fuel
- RC Bodies
- Carbon Fiber Parts
- Transmitters and Receivers
- RC Tools
- Bag and Carriage RC trolley
- RC Nitro Engines
- Outlet - RCMITICO
- Customized Clothing
- RC Tires
- Servos
- Electric Scooter and Motorbike
- Screws
Trending
Special Products
Our Stores
Filter By
Availability
Availability
Brand
Brand
Spare parts for MBX8
There are 352 products.
Set Anti roll bar Rear Ultimate Racing for Mugen - Associated - XRAY
In Stock
This is a Set of 4 Ultimate Racing Rear Anti-Roll Bar intended for Mugen, Associated and Xray. It’s black anodized, and laser engraved for easy identification. Package includes the following rear anti-roll bars.
Rear anti-roll bars:- UR1782-26 ULTIMATE 2.6mm REAR ANTI-ROLL BAR- UR1782-27 ULTIMATE 2.7mm REAR ANTI-ROLL BAR- UR1782-28 ULTIMATE 2.8mm REAR ANTI-ROLL BAR- UR1782-29 ULTIMATE 2.9mm REAR ANTI-ROLL BAR
Rear anti-roll bars:- UR1782-26 ULTIMATE 2.6mm REAR ANTI-ROLL BAR- UR1782-27 ULTIMATE 2.7mm REAR ANTI-ROLL BAR- UR1782-28 ULTIMATE 2.8mm REAR ANTI-ROLL BAR- UR1782-29 ULTIMATE 2.9mm REAR ANTI-ROLL BAR
€18.90
Front Front Lower A arm mount Mugen MBX8/8R Ultimate
In Stock
This is the optional Mugen MBX8/8R Front-Front Lower “A” Arm Mount from Ultimate Racing. It is machined from T6-7075 aluminum and anodized in dark gray.
It is 7mm thick, and the original Mugen is 5mm. This extra thickness provides greater robustness.
It is 7mm thick, and the original Mugen is 5mm. This extra thickness provides greater robustness.
€17.90
Front Rear Lower B arm mount Mugen MBX8/8R Ultimate
In Stock
It is machined from T6-7075 aluminum and anodized in dark gray. It is 7mm thick, and the original Mugen is 5mm, greater robustness.
Specifically designed to prevent breakage of the arm mount bushing. This is achieved because the bushing rests entirely on the arm mount, so when the car receives a front impact, the pin will never pierce the bushing. Even though this area has been reinforced, a small hole has been left where the bushing rests so that we can see in which position it is mounted.
Specifically designed to prevent breakage of the arm mount bushing. This is achieved because the bushing rests entirely on the arm mount, so when the car receives a front impact, the pin will never pierce the bushing. Even though this area has been reinforced, a small hole has been left where the bushing rests so that we can see in which position it is mounted.
€17.90
Closed wheel nuts 17mm Ultimate Racing
In Stock
For 1/8 wheels (Buggy, Truggy, Monster Truck).
Specs:- Its closed end design helps protect the wheel hex from impact.- Super lightweight design following the aesthetics of the wheel hex.- All the apexes of the nut include a chamfer that helps to fit the nut more quickly and easily with the wheel wrench.- The part in contact with the rim is knurled for a better grip.
Package includes 4 nuts.
Specs:- Its closed end design helps protect the wheel hex from impact.- Super lightweight design following the aesthetics of the wheel hex.- All the apexes of the nut include a chamfer that helps to fit the nut more quickly and easily with the wheel wrench.- The part in contact with the rim is knurled for a better grip.
Package includes 4 nuts.
€18.90
Wheel hex set +0/1/2mm Lightweight Set Ultimate Racing
In Stock
This is the Ultimate Racing Lightweight 0mm, +1mm and +2mm Wheel Hexagon Set. They are machined from T6-7075 Aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
€29.90
Wheel hex set 0mm Lightweight Ultimate Racing
In Stock
This is the Ultimate Racing Lightweight 0mm Wheel Hexagon. It is machined from T6-7075 Aluminum and anodized in dark gray.
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
€11.90
Wheel hex set 1mm Lightweight Ultimate Racing
In Stock
This is the Ultimate Racing Lightweight +1mm Wheel Hexagon. It is machined from T6-7075 Aluminum and anodized in dark gray.
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
€11.90
Wheel hex set 2mm Lightweight Ultimate Racing
In Stock
This is the Ultimate Racing Lightweight +2mm Wheel Hexagon. It is machined from T6-7075 Aluminum and anodized in dark gray.
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
Intended for: Mugen, Associated, Xray, Sworkz, Losi and Tekno among others.
Thanks to its design, its weight has been lightened about 25% compared to the original Mugen ones.
All the apexes of the hexagon have a chamfer that helps to make wheel changes faster and easier.
Quantity: 2 pcs
€11.90
Vented steel brake disks Ultimate Racing
In Stock
Vented steel brake disks intended for Mugen and Sworkz among others.
Thanks to the holes and slots we get a lower temperature which results in less wear and a more uniform braking feel.
Due to these grooves, we also achieve significant weight savings. The Ultimate brake discs are 30% lighter than the original Mugen discs. This weight savings in rotational mass translates into faster acceleration and lower fuel consumption.
Quantity: 2 pcs
Thanks to the holes and slots we get a lower temperature which results in less wear and a more uniform braking feel.
Due to these grooves, we also achieve significant weight savings. The Ultimate brake discs are 30% lighter than the original Mugen discs. This weight savings in rotational mass translates into faster acceleration and lower fuel consumption.
Quantity: 2 pcs
€23.90
Aluminum ball link protector Ultlimate Racing
In Stock
This is the Ultimate Racing Aluminum Steering Ball Link Protector. It is machined from T6-7075 aluminum and anodized in dark gray.
Designed to fit the ball link to prevent the rims from rubbing when turning the wheels and weakening the ball link.
Quantity: 2 pcs
Mounting: No glue is required. Place the protectors as far as possible inside the ball joints and thread the tie rod. As the tie rod is threaded, the plastic of the ball joint expands, locking the protector in place.
Designed to fit the ball link to prevent the rims from rubbing when turning the wheels and weakening the ball link.
Quantity: 2 pcs
Mounting: No glue is required. Place the protectors as far as possible inside the ball joints and thread the tie rod. As the tie rod is threaded, the plastic of the ball joint expands, locking the protector in place.
€9.90
Aluminum front center 84.5mm driveshaft Ultimate Racing
In Stock
It is machined from T6-7075 aluminum and anodized in dark gray.
Being made of aluminum and not steel as the original Mugen, we get more flexibility. This extra flexibility translates into greater traction while smoothing the reactions of the car when accelerating.
In addition, we lighten its weight since the aluminum ones weigh 50% less than the original Mugen steel ones. This rotational weight savings translates into lower fuel consumption and faster acceleration.
Being made of aluminum and not steel as the original Mugen, we get more flexibility. This extra flexibility translates into greater traction while smoothing the reactions of the car when accelerating.
In addition, we lighten its weight since the aluminum ones weigh 50% less than the original Mugen steel ones. This rotational weight savings translates into lower fuel consumption and faster acceleration.
€7.90
Aluminum center rear 115mm driveshaft Ultimate Racing
In Stock
This is the 115cm Aluminum Rear Centre Driveshaft from Ultimate Racing. It is machined from T6-7075 aluminum and anodized in dark gray.
Being made of aluminum and not steel as the original Mugen, we get more flexibility. This extra flexibility translates into greater traction while smoothing the reactions of the car when accelerating.
Being made of aluminum and not steel as the original Mugen, we get more flexibility. This extra flexibility translates into greater traction while smoothing the reactions of the car when accelerating.
€7.90
LiPo Battery 7.4v ULTIMATE receiver 2500mAh
In Stock
Nuevo pack de batería Lipo plana 2S de 2500 mAh de capacidad con conector estilo JR de Ultimate Racing. Diseñado para dar energía a los elementos electrónicos de coche de escala 1/10 y 1/8. Capacidad: 2500mAhVoltaje: 7.4V (2S)Dimensiones (mm): 86x29.5x16.5Peso: 90gConector: tipo JR
€29.90
ULTIMATE 6.6v 2500mah LiFe Flat receiver battery pack JR
In Stock
New 6.6v. 2500mAh Ultimate Racing LiFe Flat Receiver Pack with JR plug. To power the electronics of 1/10th & 1/8th scale nitro race cars. Standard dimensions, the RX-Packs are suitable for most R/C models available on the market that require flat receiver battery packs like Mugen, Associated, etc.
Capacity: 2500mAhVoltage: 6.6V (2S)Dimensions (mm): 90x30x17Weight: 90gConnector: JR plug
Capacity: 2500mAhVoltage: 6.6V (2S)Dimensions (mm): 90x30x17Weight: 90gConnector: JR plug
€27.95
Lexan Rear wing Buggy 1/8 Ultimate Racing 1mm
In Stock
1/8 off road Lexan Rear Wing Ultimate Racing. This rear wing provides more rotation in slow corners while improving stability in fast corners due to its reduced weight.
It is made of high quality 1.0mm lexan, so it's more resistant than the 1.0mm lexan wings. Wings are not pre-cut but come with the lines for easy cutting. Each wing is made up of 2 parts, the main wing and the central part.
The central part helps to increase downforce while reinforcing the main wing.
It is made of high quality 1.0mm lexan, so it's more resistant than the 1.0mm lexan wings. Wings are not pre-cut but come with the lines for easy cutting. Each wing is made up of 2 parts, the main wing and the central part.
The central part helps to increase downforce while reinforcing the main wing.
€24.90
Lexan Rear wing Buggy 1/8 Ultimate Racing 1.5mm
In Stock
1/8 off road Lexan Rear Wing Ultimate Racing. This rear wing provides more rotation in slow corners while improving stability in fast corners due to its reduced weight.
It is made of high quality 1.5mm lexan, so it's more resistant than the 1.0mm lexan wings. Wings are not pre-cut but come with the lines for easy cutting. Each wing is made up of 2 parts, the main wing and the central part.
The central part helps to increase downforce while reinforcing the main wing.
It is made of high quality 1.5mm lexan, so it's more resistant than the 1.0mm lexan wings. Wings are not pre-cut but come with the lines for easy cutting. Each wing is made up of 2 parts, the main wing and the central part.
The central part helps to increase downforce while reinforcing the main wing.
€32.50
€3.25
€3.25
€3.25
€3.25
Clear body Vistion Mugen MBX8 MBX8R Nitro Pre-cut
In Stock
Vision clear body for 1/8 Buggy Mugen MBX8 and MBX8R Nitro
€35.90
Clear body Vistion Mugen MBX8 Electdric Pre-cut
In Stock
Vision clear body for 1/8 Buggy Mugen MBX8 Electric
€35.90
€5.50
6.0v NiMh 1800mah XTR Flat receiver battery
In Stock
Batería para receptor de 6v Plana, esta bateria es de NiMh sin memoria. Tiene 1800 mAh de capacidad con conector Futaba de XTR Racing para coches RC de escala 1/10 y 1/8.
Capacidad: 1800mAhVoltaje: 6vDimensiones (mm): 85x30x17cmPeso: 115gConector: Futaba
Capacidad: 1800mAhVoltaje: 6vDimensiones (mm): 85x30x17cmPeso: 115gConector: Futaba
€16.50
LiFe Battery 6.6v XTR receiver 1800mAh Flat
Out-of-Stock
Batería LiFe plana 2S de 1800 mAh de capacidad con conector Futaba de XTR Racing para receptor de coches RC. Para coches Nitro de escala 1/10 y 1/8.
Capacidad: 1800mAhVoltaje: 6.6V (2S)Dimensiones (mm): 85x29x16Peso: 75gConector: Futaba
Capacidad: 1800mAhVoltaje: 6.6V (2S)Dimensiones (mm): 85x29x16Peso: 75gConector: Futaba
€27.90
LiFe Battery 6.6v XTR receiver 2000mAh Hump Square
Out-of-Stock
Batería LiFe plana 2S de 2000 mAh de capacidad con conector Futaba de XTR Racing para receptor de coches RC. Para coches Nitro de escala 1/10 y 1/8.
Capacidad: 2000mAhVoltaje: 6.6V (2S)Dimensiones (mm): 31x31x55Peso: 84gConector: Futaba
Capacidad: 2000mAhVoltaje: 6.6V (2S)Dimensiones (mm): 31x31x55Peso: 84gConector: Futaba
€27.90
LiPo Battery 7.4v XTR receiver 2500mAh Flat
In Stock
Nuevo pack de batería Lipo plana 2S de 2500 mAh de capacidad con conector estilo JR de Ultimate Racing. Diseñado para dar energía a los elementos electrónicos de coche de escala 1/10 y 1/8. Capacidad: 2500mAh
Voltaje: 7.4V (2S)Dimensiones (mm): 86x29.5x16.5Peso: 90gConector: tipo JR
Voltaje: 7.4V (2S)Dimensiones (mm): 86x29.5x16.5Peso: 90gConector: tipo JR
€27.90
LiPo Battery 7.4v XTR receiver 2500mAh Hump Square
In Stock
Batería LiPo cuadrada 2S de 2000 mAh de capacidad con conector Futaba de XTR Racing para receptor de coches RC. Para coches Nitro de escala 1/10 y 1/8.
Capacidad: 2500mAhVoltaje: 7.4V (2S)Dimensiones (mm): 31x31x55Peso: 84gConector: Futaba
Capacidad: 2500mAhVoltaje: 7.4V (2S)Dimensiones (mm): 31x31x55Peso: 84gConector: Futaba
€27.90