SKYRC microprocessor controlled on/off switch for RC cars. A simple push button acts as a switch and thus eliminates the well-known problems such as loose contacts or similar that often occur with mechanical switches.
In order to optimally measure the suspension travel of a car, a so-called suspension travel meter is required. With it, both negative and positive suspension travel can be determined and measured.
The suspension travel is one of the most important parameters of the set-up, as it influences, for example, the roll angle and weight distribution during acceleration, braking and cornering.
Technical data:- Measuring range: -3 to +10mm- Graduation: 1mm
Use this gauge to determine the vehicle height or, more precisely, the distance between the bottom of the chassis and the ground.
Just like the suspension travel, the vehicle height also influences the rolling behaviour (tendency to roll over) of the vehicle and the available grip as well as the cornering speed.
Technical data:- Measuring range: 3.8 - 7mm- Graduation: 0.2mm
The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels.
Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.
Smart Charging Management System for UAV/ Agricultural Drone Batteries Paired with PC1080C.
The G630 can detect the remaining capacity of the batteries connected, and it will automatically charge the one with higher capacity first. Which improves working efficiency.It also has input& output reverse polarity protection.
Specifications:- Battery Type: LiPo/ LiHV 6S- Maximum Current: 30A- Battery Pack Count: 1-6 Packs- Paired Charger: PC1080C- Size: 263x78x32mm
Simple, robust and incredibly powerful - that's the new BD250 discharger by SkyRC. Virtually any battery, regardless of type and size, can be used for discharging.
But measuring the battery capacity is also pretty easy with the BD250, successor to the BD200. Stylish and small, plus a state-of-the-art cooling system and IXYS MOSFETs ensure that successful discharging is possible at a constant 250W.
The SkyRC Bluetooth Dongle creates a wireless connection between a SkyRC charger and the smartphone. This gives you access to all functions and settings of the SkyCharger app. Thanks to the upgrade of the Bluetooth version from 4.2 to 5.0, range, speed and more have been greatly improved.
It only has to be connected to the charger with the enclosed micro-USB cable. It is immediately ready for use. If the dongle is not connected, it is automatically in sleep mode.
With all the inherited advantages of GC301, GC401 introduces three drive modes, which are selectable by pushing the button.
GC-401 allows the racing car to travel in the specified direction and provides more accurate, stable, and more controllable steering at high speed.
BD350 discharger supports most RC batteries and works with SkyRC T1000 charger with a discharge current of up to 40A and discharge power of 350W.
Specifications:- Working Voltage: DC 5V- Discharge Power: 350W- Discharge Current: 0.1-40A- Over Temp. Protection: >95C- Working Temp.: 0C~40C- Working Humidity: 0%~75%- Size: 157x105x93mm- Net Weight: 1224g
Finally, SkyRC introduces the lightweight Rubber Tire Sander to our seasoned racing drivers.
To remove the seam from the center of a new tire, RTS001 is a quick and effortless alternative to skip taking 2-3 laps around the track.
- Easy to use - Rubber tire sander for touring class - Quiet operation - 7.2v - 12v DC Input - Powerful high torque DC motor with dual bearings - Lightweight aluminum case
Finally, SkyRC introduces the lightweight Rubber Tire Sander to our seasoned racing drivers.
To remove the seam from the center of a new tire, RTS001 is a quick and effortless alternative to skip taking 2-3 laps around the track.
- Easy to use - Rubber tire sander for touring class - Quiet operation - 7.2v - 12v DC Input - Powerful high torque DC motor with dual bearings - Lightweight aluminum case
A bold, distinctive and aggressively elegant bike: SkyRC Super Rider 1/4 Scale Dirt Bike, Get Your Heart Racing & Your Blood Boiling
SkyRC Super Rider SR5 is a ready-to-run 1/4 dirt motocross with electronics and components installed in the factory.
Install the battery and get ready to run, you will enjoy its stability and terrific performance under different terrain conditions.